Sintered Fiber Felt Feature
1. Sintered fiber felt is made from different diameters stainless steel fibers
2. Sintered fiber felt is sintered in a high temperature vacuum furnace. So stainless steel fiber will not shed
3. Sintered fiber felt is a good filter media for depth filtration
4. Sintered fiber felt has high dirt holding capacity because of three dimensional fiber structures
5. Sintered fiber felt has a very high filter efficiency because of differential fiber layers density gradients
6. High porosity
7. High filter rating accuracy
8. High temperature resistance
9. High corrosion resistance
10. Pressure rise rate is slow in filtration process
11. Pressure loss is low in filtration process
12. High flow rate at low differential pressure
13. Washable and Cleanable
14. Reusable
15. Long service life
16. Easy to be pleated
17. Easy to be welded, fabricated
18. Easy to be cutted into different shapes, such as circular, sheet
Sintered Fiber Felt Technical Parameter
Raw Material: SS 316L
Filter Rating: 1-300 Microns
Filter Efficiency: > 99.99 %
Operation Temperature: ≤ 816 ℃
Length: ≤ 1200 mm
Width: ≤ 1000 mm
Regular Size: 500 mm*500 mm,500 mm*1000 mm,1000 mm*1000 mm or others
Special Size: 1500 mm*900 mm
Thickness: 0.2-10 mm
Number of Layers:
1. One layer (Sintered Fiber Felt)
2. Two layers (One Side Protective Wire Mesh/Sintered Fiber Felt)
3. Two layers (One Side Protective Wire Mesh/Sintered Fiber Felt/One Side Protective Wire Mesh)
Application
Polyester filtration, polymer filtration, high viscosity filtration, fuels and lubricants filtration, oil filtration, steam filtration, high temperature gas filtration, high temperature liquid filtration, steam filtration, potable and process water filtration, beverages filtration, detergent filtration, solvents filtration, pharmaceutical industry, chemical industry, chemical fiber industry, food industry
